View TSV622_4487594.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TSV622, TSV623, TSV624, TSV625
Rail-to-rail input/output 29 A 420 kHz CMOS operational amplifiers
Features

Rail-to-rail input and output Low power consumption: 29 A typ, 36 A max Low supply voltage: 1.5 - 5.5 V Gain bandwidth product: 420 kHz typ Unity gain stability Low power shutdown mode: 5 nA typ Good accuracy: 800 V max (A version) Low input bias current: 1 pA typ Micropackages: MiniSO-8, SOT23-8, MiniSO-10, TSSOP14, TSSOP16 EMI hardened operational amplifiers High tolerance to ESD: 4 kV HBM Extended temperature range: -40 to +125 C MiniSO-8 SO-8 SOT23-8
Applications

Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation TSSOP-16 TSSOP-14
Description
The TSV622, TSV623, TSV624 and TSV625 dual and quad operational amplifiers offer low voltage, low power operation and rail-to-rail input and output. The TSV62x series features an excellent speed/power consumption ratio, offering a 420 kHz gain bandwidth product while consuming only 29 A at a 5 V supply voltage. These opamps are unity gain stable for capacitive loads up to 100 pF. They also feature an ultra-low input bias current and low input offset voltage.
TSV623 (dual) and TSV625 (quad) have two shutdown pins in order to reduce power consumption. These features make the TSV62x family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering.
June 2009
Doc ID 15689 Rev 2
1/25
www.st.com 25
Contents
TSV62x
Contents
1 2 3 4 Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Rail-to-rail input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Optimization of DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Shutdown function (TSV623, TSV625) . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Driving resistive and capacitive loads . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.1 5.2 5.3 5.4 5.5 5.6 SOT23-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 SO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 MiniSO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 MiniSO-10 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6 7
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2/25
Doc ID 15689 Rev 2
TSV62x
Package pin connections
1
Package pin connections
Figure 1. Pin connections for each package (top view)
Out1
Out1 In1In1+ VCC1 2 3 4 _ + _ + 8 7 6 5 VCC+ Out2 In2In2+
1 2 3 4 5 _ + _ +
10 VCC+ 9 8 7 6 Out2 In2In2+ SHDN2
In1In1+ VCCSHDN1
TSV622IDT/IST/ILT SO8/Mini-SO8/SOT23-8
1 2 3 4 5 6 7 8
TSV623IST MiniSO-10
Out1
16 Out4 _ + _ + 15 In414 In4+ 13 VCC+ _ + _ 12 In3+ 11 In310 Out3 9 SHDN3/4
Out1 In1In1+ VCC+ In2+ In2Out2
1 2 3 4 5 6 7 + _ + _ _ + _ +
14 Out4 13 In412 In4+ 11 VCC10 In3+ 9 8 In3Out3
In1In1+ VCC+ In2+ In2Out2 SHDN1/2
TSV624IPT TSSOP14
TSV625IPT TSSOP16
Doc ID 15689 Rev 2
3/25
Absolute maximum ratings and operating conditions
TSV62x
2
Absolute maximum ratings and operating conditions
Table 1.
Symbol VCC Vid Vin Iin SHDN Tstg Supply voltage
(1) (2)
Absolute maximum ratings (AMR)
Parameter Value 6 VCC VCC- - 0.2 to VCC++ 0.2 10
(3)
Unit V V V mA V C
Differential input voltage Input voltage Input current
(3) (4)
Shutdown voltage
VCC- - 0.2 to VCC++ 0.2 -65 to +150 105 190 125 113 100 95 150 4 200 1.5 200
Storage temperature Thermal resistance junction to ambient(5)(6) SOT23-8 MiniSO-8 SO-8 Mini-SO10 TSSOP14 TSSOP16 Maximum junction temperature HBM: human body model(7) model(9) model(8)
Rthja
C/W
Tj ESD
C kV V kV mA
MM: machine
CDM: charged device Latch-up immunity
1. All voltage values, except differential voltages are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. VCC-Vin must not exceed 6 V, Vin must not exceed 6V. 4. Input current must be limited by a resistor in series with the inputs. 5. Short-circuits can cause excessive heating and destructive dissipation. 6. Rth are typical values. 7. Human body model: 100 pF discharged through a 1.5 k resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 8. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ), done for all couples of pin combinations with other pins floating. 9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to ground.
Table 2.
Symbol VCC Vicm Toper
Operating conditions
Parameter Supply voltage Common mode input voltage range Operating free air temperature range Value 1.5 to 5.5 VCC- - 0.1 to VCC+ + 0.1 -40 to +125 Unit V V C
4/25
Doc ID 15689 Rev 2
TSV62x
Electrical characteristics
3
Table 3.
Symbol
Electrical characteristics
Electrical characteristics at VCC+ = +1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25 C, and RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
DC performance TSV62x TSV62xA TSV623AIST - MiniSO10 Vio Offset voltage TSV62x -Tmin < Top < Tmax TSV62xA - Tmin < Top < Tmax TSV623AIST - Tmin < Top < Tmax Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Common mode rejection ratio 20 log (Vic/Vio) Large signal voltage gain 2 1 Tmin < Top < Tmax 1 1 Tmin < Top < Tmax 0 V to 1.8 V, Vout = 0.9 V Tmin < Top < Tmax RL= 10 k Vout= 0.5 V to 1.3 V , Tmin < Top < Tmax High level output voltage Low level output voltage RL = 10 k Tmin < Top < Tmax RL = 10 k Tmin < Top < Tmax Vout = 1.8 V Tmin < Top < Tmax Isource Vout = 0 V Tmin < Top < Tmax ICC Supply current (per operator) No load, Vout=VCC/2 Tmin < Top < Tmax 6 4 6 4 25 31 33 A A 10 53 51 78 73 35 50 5 4 12 mA 35 50 95 1 74 10
(1)
4 0.8 1 6 2 2.2
mV
DVio Iio
V/C pA pA pA pA dB dB dB dB mV mV
100 10
(1)
Iib
100
CMR
Avd VOH VOL
Isink Iout
AC performance GBP Fu m Gm SR Gain bandwidth product Unity gain frequency Phase margin Gain margin Slew rate , RL = 10 k CL = 100 pF, f = 100 kHz RL = 10 k CL = 100 pF, , RL = 10 k, CL = 100 pF RL = 10 k, CL = 100 pF RL = 10 k, CL = 100 pF, Av=1 0.1 275 340 280 41 8 0.155 kHz kHz Degrees dB V/s
1. Guaranteed by design.
Doc ID 15689 Rev 2
5/25
Electrical characteristics Table 4.
Symbol DC performance SHDN = VCCICC Supply current in shutdown mode (all operators) Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low Output leakage in shutdown mode SHDN = VCC+ SHDN = VCCSHDN = VCCTmin < Top < 125 C 10 10 50 1 Tmin < Top < 85 C Tmin < Top < 125 C ton toff VIH VIL IIH IIL IOLeak RL = 5 k, Vout = VCC- to VCC- + 0.2 V RL = 2 k, Vout = VCC+ - 0.5 V to VCC+ - 0.7 V 1.35 0.6 200 20 2.5 50 200 1.5
TSV62x
Shutdown characteristics VCC = 1.8 V (TSV623, TSV625)
Parameter Conditions Min. Typ. Max. Unit
nA nA A ns ns V V pA pA pA nA
6/25
Doc ID 15689 Rev 2
TSV62x Table 5.
Symbol DC performance TSV62x TSV62xA TSV623AIST - MiniSO10 Vio Offset voltage TSV62x -Tmin < Top < Tmax TSV62xA - Tmin < Top < Tmax TSV623AIST - Tmin < Top < Tmax Input offset voltage drift Input offset current Iio Tmin < Top < Tmax Input bias current Tmin < Top < Tmax Common mode rejection ratio 20 log (Vic/Vio) Large signal voltage gain 0 V to 3.3 V, Vout = 1.65 V Tmin < Top < Tmax RL=10 k Vout= 0.5 V to 2.8 V , Tmin < Top < Tmax High level output voltage Low level output voltage RL = 10 k Tmin < Top < Tmax RL = 10 k Tmin < Top < Tmax Vo = 5 V Tmin < Top < Tmax Isource Vo = 0 V Tmin < Top < Tmax ICC Supply current (per operator) No load, Vout= 2.5 V Tmin < Top < Tmax 23 20 23 20 57 53 81 76 35 50
Electrical characteristics VCC+ = +3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 C, RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
4 0.8 1 mV 6 2 2.2 2 1 1 1 10(1) 100 10(1) 100 V/C pA pA pA pA dB dB 98 dB dB 5 4 45 mA 38 mA 26 33 35 A A 35 50 mV mV
DVio
Iib
1 79
CMR
Avd VOH VOL
Isink Iout
AC performance GBP Fu m Gm SR Gain bandwidth product Unity gain frequency Phase margin Gain margin Slew rate RL = 10 k CL = 100 pF, f = 100 kHz , RL = 10 k, CL = 100 pF RL = 10 k, CL = 100 pF RL = 10 k, CL = 100 pF RL = 10 k CL = 100 pF, AV = 1 , 0.11 310 380 310 41 8 0.175 kHz kHz Degrees dB V/s
1. Guaranteed by design.
Doc ID 15689 Rev 2
7/25
Electrical characteristics Table 6.
Symbol DC performance TSV62x TSV62xA TSV623AIST - MiniSO10 Vio Offset voltage TSV62x - Tmin < Top < Tmax TSV62xA - Tmin < Top < Tmax TSV62xA - Tmin < Top < Tmax Input offset voltage drift Input offset current Tmin < Top < Tmax Input bias current Tmin < Top < Tmax Common mode rejection ratio 20 log (Vic/Vio) Large signal voltage gain 0 V to 5 V, Vout = 2.5 V Tmin < Top < Tmax RL=10 k Vout = 0.5 V to 4.5 V , Tmin < Top < Tmax Supply voltage rejection ratio VCC = 1.8 to 5 V 20 log (VCC/Vio) Tmin < Top < Tmax VRF = 100 mVrms, f = 400 MHz EMIRR EMI rejection ratio
EMIRR = -20 log (VRFpeak/Vio)
TSV62x
VCC+ = +5 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 C, RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
4 0.8 1 mV 6 2 2.2 2 1 10(1) 100 10(1) 100 V/C pA pA pA pA dB
DVio Iio
1 1
Iib
1 60 55 85 80 75 73 61 85 102 98 80
CMR
dB
Avd
dB
SVR
VRF = 100 mVrms, f = 900 MHz VRF = 100 mVrms, f = 1800 MHz VRF = 100 mVrms, f = 2400 MHz
dB 92 83 35 50 6 35 mV 50 40 35 40 35 29 36 38 A A 74 mA 69 mA 7 mV
VOH
High level output voltage
RL = 10 k Tmin < Top < Tmax
VOL
Low level output voltage
RL = 10 k Tmin < Top < Tmax
Isink Iout Isource
Vo = 5 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout = 2.5 V Tmin < Top < Tmax
ICC
Supply current (per operator)
AC performance GBP Fu Gain bandwidth product Unity gain frequency , RL = 10 k CL = 100 pF, f = 100 kHz RL = 10 k, CL = 100 pF 350 420 360 kHz kHz
8/25
Doc ID 15689 Rev 2
TSV62x Table 6.
Symbol m Gm SR en THD+en
Electrical characteristics VCC+ = +5 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 C, RL connected to VCC/2 (unless otherwise specified) (continued)
Parameter Phase margin Gain margin Slew rate Equivalent input noise voltage Total harmonic distortion + noise Conditions RL = 10 k, CL = 100 pF RL = 10 k, CL = 100 pF , RL = 10 k CL = 100 pF, AV = 1 f = 1 kHz Av = 1, f = 1 kHz, RL= 100 k, Vicm = Vcc/2, Vout = 2 Vpp 0.12 Min. Typ. 40 8 0.19 77 0.002 Max. Unit Degrees dB V/s
nV ----------Hz
%
1. Guaranteed by design.
Table 7.
Symbol
Shutdown characteristics at VCC = 5 V (TSV623, TSV625)
Parameter Conditions Min. Typ. Max. Unit
DC performance SHDN = VIL ICC Supply current in shutdown mode (all operators) Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low SHDN = VCC+ SHDN = VCC10 10 50 1 Tmin < Top < 85 C Tmin < Top < 125 C ton toff VIH VIL IIH IIL IOLeak RL = 5 k Vout = VCC- to VCC- + 0.2 V , RL = 5 k Vout = VCC+ - 0.5 V to , VCC + - 0.7 V 2 0.8 200 20 5 50 200 1.5 nA nA A ns ns V V pA pA pA nA
Output leakage in shutdown SHDN = VCCmode Tmin < Top < 125 C
Doc ID 15689 Rev 2
9/25
Electrical characteristics
TSV62x
Figure 2.
Supply current vs. supply voltage at Vicm = VCC/2
Figure 3.
Output current vs. output voltage at VCC = 1.5 V
Figure 4.
Output current vs. output voltage at Figure 5. VCC = 5 V
Voltage gain and phase vs. frequency at Vcc = 1.5 V
Figure 6.
Voltage gain and phase vs. frequency at VCC = 5 V
Figure 7.
Phase margin vs. output current at VCC = 1.5 V and VCC = 5 V
10/25
Doc ID 15689 Rev 2
TSV62x
Electrical characteristics
Figure 8.
Positive slew rate vs. time
Figure 9.
Negative slew rate vs. time
Figure 10. Positive slew rate vs. supply voltage
Figure 11. Negative slew rate vs. supply voltage
Figure 12. Noise vs. frequency
Input equivalent noise density (nV/VHz)
Figure 13. Distortion + noise vs. frequency
1 Vcc=1.5V Rl=10k Vcc=1.5V Rl=100k
Vicm=2.5V Vicm=4.5V
THD + N (%)
0.1
0.01
Vcc=5V T=25 C

Frequency (Hz)
1E-3 10
100
1000
10000
100000
Doc ID 15689 Rev 2
11/25
Electrical characteristics
TSV62x
Figure 14. Distortion + noise vs. output voltage
Vcc=1.5V Rl=10kohms Vcc=1.5V Rl=100kohms
THD + N (%)
Figure 15. EMIRR vs. frequency at VCC = 5 V, T = 25 C
120
EMIRR Vpeak (dB)
f=1kHz Gain=1 BW=22kHz Vicm=Vcc/2
100 80 60 40 20 0 1 10
Vcc=5.5V Rl=10kohms Vcc=5.5V Rl=100kohms
Output Voltage (Vpp)
10
2
10
3
12/25
Doc ID 15689 Rev 2
TSV62x
Application information
4
4.1
Application information
Operating voltages
The TSV62x can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8-, 3.3and 5-V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV62x characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40 C to +125 C.
4.2
Rail-to-rail input
The TSV62x are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common mode range is extended from VCC- - 0.1 V to VCC+ + 0.1 V. The transition between the two pairs appears at VCC+ - 0.7 V. In the transition region, the performance of CMRR, PSRR, Vio (Figure 16 and Figure 17) and THD is slightly degraded.
Figure 16. Input offset voltage vs input common mode at VCC = 1.5 V
Figure 17. Input offset voltage vs input common mode at VCC = 5 V
The devices are guaranteed without phase reversal.
4.3
Rail-to-rail output
The operational amplifier's output level can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 k resistive load to VCC/2.
Doc ID 15689 Rev 2
13/25
Application information
TSV62x
4.4
Optimization of DC and AC parameters
These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of current consumption (29 A typical, min/max at 17%). Parameters linked to the current consumption value, such as GBP, SR and AVd benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability. In addition, the minimum values of GBP and SR are guaranteed (GBP = 350 kHz min, SR = 0.12 V/s min).
4.5
Shutdown function (TSV623, TSV625)
The operational amplifier is enabled when the SHDN pin is pulled high. To disable the amplifier, the SHDN must be pulled down to VCC-. When in shutdown mode, the amplifier output is in a high impedance state. The SHDN pin must never be left floating but tied to VCC+ or VCC-. The turn-on and turn-off times are calculated for an output variation of 200 mV (Figure 18 and Figure 19 show the test configurations).
Figure 18. Test configuration for turn-on time (Vout pulled down)
Figure 19. Test configuration for turn-off time (Vout pulled down)
+Vcc
GND
2KO
+Vcc
GND
2KO
Vcc = 5V T = 25C Vout Shutdown pulse
Vcc-0.5V
+ DUT GND
Vcc-0.5V
+ DUT GND
Figure 20. Turn-on time, VCC = 5 V, Vout pulled down, T = 25 C
Shutdown pulse
Figure 21. Turn-off time, VCC = 5 V, Vout pulled down, T = 25 C
Vout
Voltage (V)
Vcc = 5V T = 25 C RL connected to GND
Time( s)
Output voltage (V)
Time( s)
14/25
Doc ID 15689 Rev 2
TSV62x
Application information
4.6
Driving resistive and capacitive loads
These products are micro-power, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 5 k For lower resistive loads, the THD level may significantly . increase. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding a small resistor in series at the output can improve the stability of the device (see Figure 22 for recommended in-series resistor values). Once the value of the in-series resistor has been selected, the stability of the circuit should be tested on bench and simulated with the simulation model. Figure 22. In-series resistor vs. capacitive load
4.7
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins.
4.8
Macromodel
Two accurate macromodels (with or without shutdown feature) of TSV62x are available on STMicroelectronics' web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV62x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements.
Doc ID 15689 Rev 2
15/25
Package information
TSV62x
5
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark.
16/25
Doc ID 15689 Rev 2
TSV62x
Package information
5.1
SOT23-8 package information
Figure 23. SOT23-8 package mechanical drawing
Table 8.
SOT23-8 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e e1 L < 0.30 0 0.90 0.22 0.08 2.80 2.60 1.50
Millimeters Typ. Max. 1.45 0.15 1.30 0.38 0.22 3 3 1.75 0.65 1.95 0.60 8 0.012 0.035 0.009 0.003 0.110 0.102 0.059 Min.
Inches Typ. Max. 0.057 0.006 0.051 0.015 0.009 0.118 0.118 0.069 0.026 0.077 0.024
Doc ID 15689 Rev 2
17/25
Package information
TSV62x
5.2
SO-8 package information
Figure 24. SO-8 package mechanical drawing
Table 9.
SO-8 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e h L L1 k ccc 0 0.25 0.40 0.10 1.25 0.28 0.17 4.80 5.80 3.80
Millimeters Typ. Max. 1.75 0.25 0.004 0.049 0.48 0.23 4.90 6.00 3.90 1.27 0.50 1.27 1.04 8 0.10 1 0.010 0.016 5.00 6.20 4.00 0.011 0.007 0.189 0.228 0.150 Min.
Inches Typ. Max. 0.069 0.010
0.019 0.010 0.193 0.236 0.154 0.050 0.020 0.050 0.040 8 0.004 0.197 0.244 0.157
18/25
Doc ID 15689 Rev 2
TSV62x
Package information
5.3
MiniSO-8 package information
Figure 25. MiniSO-8 package mechanical drawing
Table 10.
MiniSO-8 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e L L1 L2 k ccc 0 0.40 0 0.75 0.22 0.08 2.80 4.65 2.80
Millimeters Typ. Max. 1.1 0.15 0.85 0.95 0.40 0.23 3.00 4.90 3.00 0.65 0.60 0.95 0.25 8 0.10 0 0.80 0.016 3.20 5.15 3.10 0 0.030 0.009 0.003 0.11 0.183 0.11 Min.
Inches Typ. Max. 0.043 0.006 0.033 0.037 0.016 0.009 0.118 0.193 0.118 0.026 0.024 0.037 0.010 8 0.004 0.031 0.126 0.203 0.122
Doc ID 15689 Rev 2
19/25
Package information
TSV62x
5.4
MiniSO-10 package information
Figure 26. MiniSO-10 package mechanical drawing
Table 11.
MiniSO-10 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e L L1 k aaa 0 0.40 0.05 0.78 0.25 0.15 2.90 4.75 2.90
Millimeters Typ. Max. 1.10 0.10 0.86 0.33 0.23 3.00 4.90 3.00 0.50 0.55 0.95 3 6 0.10 0 0.70 0.016 0.15 0.94 0.40 0.30 3.10 5.05 3.10 0.002 0.031 0.010 0.006 0.114 0.187 0.114 Min.
Inches Typ. Max. 0.043 0.004 0.034 0.013 0.009 0.118 0.193 0.118 0.020 0.022 0.037 3 6 0.004 0.028 0.006 0.037 0.016 0.012 0.122 0.199 0.122
20/25
Doc ID 15689 Rev 2
TSV62x
Package information
5.5
TSSOP14 package information
Figure 27. TSSOP14 package mechanical drawing
Table 12.
TSSOP14 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e L L1 k aaa 0 0.45 0.05 0.80 0.19 0.09 4.90 6.20 4.30
Millimeters Typ. Max. 1.20 0.15 1.00 1.05 0.30 0.20 5.00 6.40 4.40 0.65 0.60 1.00 8 0.10 0 0.75 0.018 5.10 6.60 4.50 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min.
Inches Typ. Max. 0.047 0.004 0.039 0.006 0.041 0.012 0.0089 0.197 0.252 0.173 0.0256 0.024 0.039 8 0.004 0.030 0.201 0.260 0.176
Doc ID 15689 Rev 2
21/25
Package information
TSV62x
5.6
TSSOP16 package information
Figure 28. TSSOP16 package mechanical drawing
Table 13.
b
TSSOP16 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e k L L1 aaa 0 0.45 0.05 0.80 0.19 0.09 4.90 6.20 4.30
Millimeters Typ. Max. 1.20 0.15 1.00 1.05 0.30 0.20 5.00 6.40 4.40 0.65 8 0.60 1.00 0.10 0.75 0 0.018 5.10 6.60 4.50 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min.
Inches Typ. Max. 0.047 0.006 0.039 0.041 0.012 0.008 0.197 0.252 0.173 0.0256 8 0.024 0.039 0.004 0.030 0.201 0.260 0.177
22/25
Doc ID 15689 Rev 2
TSV62x
Ordering information
6
Ordering information
Table 14. Order codes
Temperature range Package Packing Marking TSV622 SO-8 TSV622AID/DT TSV622IST MiniSO-8 TSV622AIST TSV622ILT TSV623IST TSV623AIST TSV624IPT TSSOP-14 TSV624AIPT TSV625IPT TSSOP-14 TSV625AIPT Tape & reel TSV625A Tape & reel TSV624A TSV625 -40 C to +125 C MiniSO-10 Tape & reel K144 TSV624 SOT23-8 Tape & reel Tape & reel K143 K107 K114 Tube and tape & reel TSV622A K107
Part number TSV622ID/DT
Doc ID 15689 Rev 2
23/25
Revision history
TSV62x
7
Revision history
Table 15.
Date 25-May-2009 15-Jun-2009
Document revision history
Revision 1 2 Initial release. Corrected pin connection diagram in Figure 1. Changes
24/25
Doc ID 15689 Rev 2
TSV62x
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 15689 Rev 2
25/25

▲Up To Search▲

Price & Availability of TSV622

	To Download TSV622 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .